[SOLVED] Embedded on USB key out of filesystem space on /

NAS4Free Basic Tune-up
Forum rules
Set-Up GuideFAQsForum Rules
diablos666
NewUser
NewUser
Posts: 7
Joined: 29 Sep 2012 00:13

[SOLVED] Embedded on USB key out of filesystem space on /

Postby diablos666 » 15 Nov 2012 02:56

My machine locked up and I rebooted it. After the reboot I received the following messages..basically it seems like /dev/md0 (which is /) is out of space.

/dev/ufsid/50625b519286b9a3: failed to read data block -1
/dev/ufsid/50625b519286b9a3: UNEXPECTED SU+J INCONSISTENCY
pid1023 (fsck_ufs), uid0 inumber 1262 on /: filesystem full
/: write failed, filesystem full
Failed to write core file for process fsck(ufs (error 28)

So the filesystem is running off an 8GB USB key and when I run a df -h it shows /, /dev and /proc at 100% utilization but the partition is only like 200MB!! Is there a way to expand the partition to use more of the available space on the USB key?

Thanks.
Last edited by al562 on 01 Jan 2013 02:20, edited 1 time in total.
Reason: Adjusted Subject. Added [SOLVED] Tag.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 3206
Joined: 22 Jun 2012 20:13
Location: Madrid (ESPAÑA)
Contact:

Re: Embedded Install on USB key now out of filesystem space

Postby raulfg3 » 15 Nov 2012 06:30

diablos666 wrote:So the filesystem is running off an 8GB USB key and when I run a df -h it shows /, /dev and /proc at 100% utilization but the partition is only like 200MB!! Is there a way to expand the partition to use more of the available space on the USB key?


YES , use full install to avoid left space when install packages, and whem promt for space to install use 4096MB in your case ( 10 times more than 384MB that is default size = minimum size propossal).

You don't mention but probably you are using embeded that are NOT designed to add packages so it's size is for default N4F packages.

User avatar
alexey123
Moderator
Moderator
Posts: 1267
Joined: 19 Aug 2012 06:22
Location: Israel, Karmiel
Contact:

Re: Embedded Install on USB key now out of filesystem space

Postby alexey123 » 15 Nov 2012 06:52

diablos666 wrote:My machine locked up and I rebooted it. After the reboot I received the following messages..basically it seems like /dev/md0 (which is /) is out of space.

/dev/ufsid/50625b519286b9a3: failed to read data block -1
/dev/ufsid/50625b519286b9a3: UNEXPECTED SU+J INCONSISTENCY
pid1023 (fsck_ufs), uid0 inumber 1262 on /: filesystem full
/: write failed, filesystem full
Failed to write core file for process fsck(ufs (error 28)

What version number you use?

diablos666 wrote:So the filesystem is running off an 8GB USB key and when I run a df -h it shows /, /dev and /proc at 100% utilization but the partition is only like 200MB!!

root filesystem in case embedded mount not from usb-pen. It mount from ram disk, and df -h calculate ramdisk size.

diablos666 wrote: Is there a way to expand the partition to use more of the available space on the USB key?
Thanks.

Use embedded+data partition install.
Home9.2.0.1 - Sandstorm (revision 972) / x64-embedded on SAPPHIRE Pure Mini E350 / 8G RAM
Test 9.3.0.1 - Nayla (revision 1190) x64-embedded on AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ / M61PME-S2 / 3G RAM

diablos666
NewUser
NewUser
Posts: 7
Joined: 29 Sep 2012 00:13

Re: Embedded Install on USB key now out of filesystem space

Postby diablos666 » 15 Nov 2012 13:33

Raulfg3 - I did think about that yesterday and did a full install onto the USB key. I then attempted to restore a previous config file but it did not work for some reason. Can I not use the embedded config file backup on the full install?

Alexey123 - I am using the latest release version of NAS4Free. It was an embedded install onto a USB key. How to I change what is on the key to embedded+data partition? I used the embedded download, unpacked it and then used win32 disk imager to put the image on the usb key.

Thanks.

User avatar
alexey123
Moderator
Moderator
Posts: 1267
Joined: 19 Aug 2012 06:22
Location: Israel, Karmiel
Contact:

Re: Embedded Install on USB key now out of filesystem space

Postby alexey123 » 16 Nov 2012 08:00

diablos666 wrote:How to I change what is on the key to embedded+data partition? I used the embedded download, unpacked it and then used win32 disk imager to put the image on the usb key.
Thanks.

You need make install from Live system and choice menu option 9 - Install/Upgrade NAS4Free from LiveCD/LiveUSB, and after option 2 - Install 'Embedded' OS on CF/USB Flash Drive or Hard Drive. You need 2 usb keys, 1 with liveusb as source , 2 - for future system, or you can use LiveCD as source and usb - as destination.
Also you can try my way install over etherboot. In this case you need VirtualBox.
Home9.2.0.1 - Sandstorm (revision 972) / x64-embedded on SAPPHIRE Pure Mini E350 / 8G RAM
Test 9.3.0.1 - Nayla (revision 1190) x64-embedded on AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ / M61PME-S2 / 3G RAM


Return to “NAS4Free Basic Tune-up”

Who is online

Users browsing this forum: No registered users and 0 guests